If you are seeing loops, or skipped stitches in your embroidery or sewing projects or having thread breakage, it might be your needle…Using the correct needle and correct stabilizer, sewing at a reasonable speed, and knowing the requirements for the fabric you are using is not a hard task if you think it through…
If you are stitching on denim, what needle would you use? what stabilizer if it is embroidery?Are you using good quality thread or old, dried out and brittle thread? Are you using metallic thread and can’t get ten stitches sewn without breakage?
The eye of a needle is a fascinating thing… needle eyes are round, long, oval and short… points are sharp, ball point, knit designed, denim designed, leather designed…you name it…Thread actually goes through the eye of a needle several times before it becomes a stitch in your project …
The way a spool of thread is wound is also a point to remember when trouble shooting stitching issues…Metallic thread must come off the spool straight and must have a needle eye big enough to allow it to move through forward and backward several times, and metallic thread does not like friction so a much slower speed is required…
I store all my thread in a dark, dry and dust free place… sunlight and the rise and fall of humidity in a room, seasons changing from spring (moist) to winter (dry) and just the amount of dust in the room, fabric makes a lot of lint dust…all affect how your thread will behave…Below is a suggested guide for needle use… the cover photo shows some various needle eye sizes…
Have fun sewing, it should be a wonderful experience….
Fiddlestix And Stitches 